User Manual User guide
Table Of Contents
- Chapter 1 TVN 20 System Basics
- Chapter 2 TVN Advanced Topics
- HDD Configuration & Management
- Account Management (Users)
- Advanced Camera Settings
- Exception Parameters – System Health Monitoring
- Video Loss
- Remote Record & Video Download
- Additional Network Settings
- Remote Update
- Serial Port Settings – RS-232 & RS-485
- Log Files
- Appendix A Troubleshooting
- Appendix B TVN 20 Specifications
- Appendix C TVN 20 IP Camera Capacities
- Appendix D TVN 20 Supported IP Cameras
- Appendix E TVN 20 USB Archive Options
- Appendix F TruVision Device Finder
- Appendix GGlossary of Terms
- Appendix HWarranty and Support
TruVision NVR 20 User Manual 99
Figure 34: Config Tab
The following fields determine where manually saved live/recorded video and
snapshots are stored on the Browser computer that is currently connected to the
TVN 20. If multiple computers connect via the browser, each PC will have stored
on it whatever the video is the User (that Browser Computer) requested from the
TVN 20.The default settings place these different files on the Browser are listed
directly below (these locations can be changed by the User). The TVN 20’s
default setting creates on new File Folder >Program Data on the “C” drive:
Saved File Type Default File Location
Path for saving files recorded from
Live/Preview or TVN 20 recorded
video files during playback that
are saved to the Browser
computer
C:\Program Data\Web\RecordingFiles
Path for saving preview captured
images (Snapshots from Live)
C:\Program Data\Web\BMPCaptureFiles
Path for saving playback captured
images (Snapshots from Live)
C:\Program Data\Web\PlaybackPicFiles
Path for saving downloaded files
(Download from Playback)
C:\Program Data\Web\DownloadFiles
The recommendation is to keep the default settings for these remaining
elements. These settings control how the Browser (PC) connects to and