Installation Guide Owner manual

50 Monitor xL™ Advanced Installation Guide 21-3602E rev1.5
T08001 How the input will behave when it is active.
Keypad Selections (left to right on keypad screen)
Default Name Selections Description
 (no)
Transmit in OFF
(yes) □ (no)
Reporting to the Monitoring Station
 (no)
Transmit in STAY
(yes) □ (no)
Reporting to the Monitoring Station
 (no)
Transmit in ON
(yes) □ (no)
Reporting to the Monitoring Station
(UK ACPO custom point # 2 = yes)
 (no)
Sonalert in OFF
(yes) □ (no)
Keypad sounder active.
(UK ACPO custom point # 2 = yes)
 (no)
Sonalert in STAY
(yes) □ (no)
Keypad sounder active.
 (no)
Sonalert in ON
(yes) □ (no)
Keypad sounder active.
 (no)
Siren in OFF
(yes) □ (no)
System siren active.
 (no)
Siren in STAY
(yes) □ (no)
System siren active.
 (no)
Siren in ON
(yes) □ (no)
System siren active.
Default UK ACPO Custom Input Settings (T08000 and T08101)
Custom
Input Pt.
Level
Characteristic
Type
Class Bypass
Chime Pre-Alarm
T080
0 40 6
□ (no) □ (no) □ (no)
T081
0 10 5
□ (no) □ (no) □ (no)
Custom
Input Pt.
Transmit
OFF
Transmit
STAY
Transmit
ON
Sonalert
OFF
Sonalert
STAY
Sonalert
ON
Siren
OFF
Siren
STAY
Siren
ON
T080
□ (no) □ (no) □ (no) □ (no) □ (no) □ (no) □ (no) □ (no) □ (no)
T081
□ (no) □ (no)
(yes) (yes)
□ (no) □ (no) □ (no) □ (no) □ (no)
Program Section: R001 (Doors)
WARNING: R00100 – R00114 Access Control related selections are only available with the addition of
the “Feature Expansion Board
”.
R00100 Keypad Selections
(left to right on keypad screen) Example:
Default Name Selections Description
00
Access Module
Number
00 = Door undefined
01-24=Access Pod Module #
The door controller module associated
with this reader/door.
blank
Door Name 12 alpha-numeric characters
A suitable name/description for this
reader/door.
1
Module Door
Port Number
1 or 2
The 1st or 2
nd
door on the door controller
module. This is indicated on the PCB.
Tip: This is 1 for odd-numbered doors,
and 2 for even-numbered doors.
Note: The second door on each door controller module is configured separately (typically R002, R004, etc.).
00· Door Name
1
Save R00100