Installation Guide Owner manual
21-3602E rev1.5 Monitor xL™ Advanced Installation Guide 47
Program Section: U001 (Users)
U00100 Keypad Selections
(left to right on keypad screen) Example:
Default Name Selections Description
MASTER
USER
User Name Edit the same as the
Greeting Message, S001:04
Alphanumeric name for authority level - 12 characters
(A blank name field means user is undefined.)
001
Authority Level 00 = undefined user
01…30 = authority level
Assign an existing Authority Level number.
U00101 Keypad Selections (left to right on keypad screen)
Default Name Selections Description
blank
Card Number 7 Digits Numeric for Old 24
bit Card Version:
0000000-9999999
9 Digits Numeric for
Expanded 32 bit Card
Version.
0000000000-9999999999
A card numbered 9898 is entered from the right e.g.
0000009898 for both 7 and 9 digit cards.
00
Card Version 0-15
U00102 Keypad Selections
(left to right on keypad screen) Example:
Default Name Selections Description
000
Suite Security
Floor Number
0-124 Not applicable for feature sets less than 5. Greater
then 5 are Director Software/Elevator, display only.
(no)
Addition Floor
(yes) □ (no)
Not applicable for feature sets less than 5. Greater
then 5 are Director Software/Elevator, display only.
0
Suite Security
Authority
0-7
0 Not Assigned by system
1 Undefined on the condo
2-7 Condo Authorities
0
Language 0 = English, 1 = French, 2 =
Dutch, 3 = Spanish
(no)
Physically
Challenged
(yes) □ (no)
Note = Condo Floor Number is “000” and Addition Floor is “No” for a Feature Set less than five. Both will indicate active values
through the Director Software if the Feature Set is greater then five and with elevator selections. Both are only for display purposes
in this screen.
U0013 Keypad Selections (left to right on keypad screen)
Default Name Selections Description
_ _ _ _
User’s PIN
number.
–
Default MASTER User 001’s ID is 001, PIN 7793 (PSWD)
_ _ _ _
Re-enter User’s
PIN number.
– To avoid incorrect fist entry.
MASTER USER
0
0
1·
Save U00100
000··
0
·
0
··········
Save U00102