Installation Guide Owner manual
32 Monitor xL™ Advanced Installation Guide
21-3602E rev1.5
Default North American Input Settings (Pxx1:00 and Pxx1:01)
Input Pt. Circuit/Pt. Type Typically Used with
A
rea
*Buffer Area
Name (Pxxx:01)
P001
201 Entry/Exit Door (w/o access ctrl) 01 01 FRONT DOOR
P002
202 Entry Route - ON Only 01 01 LOBBY MOTION
P003
204 Interior - ON Only 01 01 OFFCE MOTION
P004
204 Interior - ON Only 01 01 INTR MOTION
P005
204 Interior - ON Only 01 01 REAR MOTION
P006
203 Perimeter - Stay & On 01 01 PERIMETER DR
P007
203 Perimeter - Stay & On 01 01 OHD (over head door)
P008
201 Entry/Exit Door (w/o access ctrl) 01 01 REAR DOOR
P009
203 Perimeter - Stay & On 01 01 PERIMETER DR
P010
203 Perimeter - Stay & On 01 01 PERIMETER DR
P011
203 Perimeter - Stay & On 01 01 PERIMETER DR
P012
203 Perimeter - Stay & On 01 01 PERIMETER DR
P013
112 Fire Immediate 01 01 KEYPAD FIRE
P014
013 Hold-up 01 01 KEYPAD PANIC
P015
114 Auxiliary Alert 01 01 KEYPAD EMERG
* A Buffer Area is a secondary area number that the point may also share. Example: a single door that between 2 areas.
Default UK ACPO Input Settings (Pxx1:00 and Pxx1:01)
Input Pt. Circuit/Pt. Type
Area Buffer Area
Name (Pxxx:01)
P001
080
Custom # 80
(Command Point,
Class: Supervisory.
See Custom Point Programming and
ACPO)
01 01 LCLCMDATEALL
P002
201 01 01 CCT DESCRIP
P003
202 01 01 CCT DESCRIP
P004
204 01 01 CCT DESCRIP
P005
204 01 01 CCT DESCRIP
P006
204 01 01 CCT DESCRIP
P007
204 01 01 CCT DESCRIP
P008
204 01 01 CCT DESCRIP
P009
204 01 01 CCT DESCRIP
P010
204 01 01 CCT DESCRIP
P011
204 01 01 CCT DESCRIP
P012
206 Day Warning 01 01 SIREN TAMPER
Program Section: E001 (Equipment Trouble Types)
E0xx00 Keypad Selections Note: “xx” represents the equipment trouble type number: 01 – 16.
(left to right on keypad screen) Example:
Default Name Selections Description
## Time Delay. Enter time delay code from
global time delay table.
00 = undefined
System Tamper can not be edited.
Trouble Type
Name
From Equipment Trouble
Type Name Table
01··
S
y
stem Tmpr
Save E00100