Spec Sheet

GE Security Product Data Sheet

www.GESecurity.com

KTD-83

Data Signal Distributor

Overview

The KTD-83 is a data signal distributor designed for use in a

Digiplex® system. It is used when an RS422 control signal must be

dispersed along separate lines of two-conductor, twisted-pair cable.

One signal input can be distributed among up to six outputs. The

KTD-83 can also be used to reamplify RS422 control signals that must

travel excessive distances between the controller and receiver.

Outstanding Features

Cable connections are made on a removable, 14-position terminal

strip. It is powered from a 12 VDC source. The KTD-83 is constructed

of aluminum. It features a black anodized finish.

Standard Features

Distributes an RS422 control signal

1 input x 6 outputs

Reamplifies signal on outputs 2 through 6

Powered from a 12 VDC source

Removable terminal strip for cable connections

Compact design

PAGE 1
e GE Security Product Data Sheet www.GESecurity.com KTD-83 Data Signal Distributor Overview The KTD-83 is a data signal distributor designed for use in a Digiplex® system. It is used when an RS422 control signal must be dispersed along separate lines of two-conductor, twisted-pair cable. One signal input can be distributed among up to six outputs. The KTD-83 can also be used to reamplify RS422 control signals that must travel excessive distances between the controller and receiver.
PAGE 2
KTD-83 Data Signal Distributor Specifications Electrical l Input voltage: 12 VDC l Input power: 6 VA l Input data signal: RS422 l Output 1: RS422 (Not amplified) l Outputs 2 to 6: RS422 (Amplified to original level) Connections l 14-position removable terminal strip Mechanical l Weight: 8 oz (227 g) l Material: 0.050 in (1.27 mm) aluminum l Finish: Black anodized Related Diagram g GE Security www.GESecurity.