Data Sheet
Z-Wave
In-Wall Dimmer
Z-Wave Wall
Receptacle
Z-Wave In-Wall
On/Off Switch
• Device can be turned on or off
manually or via convenient Z-Wave
remote control
• Brightness level can be controlled
manually or with Z-Wave remote
control
• Blue LED indicates switch location
for easy viewing in the dark
• Can be included in multiple groups
and scenes
• Supports Advanced Confi guration,
including dim rates, LED status and
invert switch
• Two-wire installation, no connection
to Neutral required
• Uses mid-size wall plate for single
gang installations
• One Z-Wave remote-controlled
AC outlet
• Remote ON/OFF control via the
Z-Wave c o ntr oller/ne t work
• Manual ON/OFF control with the
pushbutton
• Auto-Sensing* automatically turns
light ON
• One always-ON pass-through AC
outlet
• Blue LED indicates ON/OFF status
(supports advanced confi guration
for status)
• Z-Wave certifi ed
• Device can be turned on or off
manually or via convenient Z-Wave
®
remote control
• Blue LED indicates switch location
for easy viewing in the dark
• Can be included in multiple groups
and scenes
• Supports Advanced Confi guration,
LED status and invert switch
• Screw terminal installation with wiring
connections for Line (Hot), Load,
Neutral and Ground
• Uses standard-size wall plate for
single gang installations
• White fi nish complements almost
any décor
Power 120VAC, 60Hz
Signal
(Frequency)
908.42 MHz
Load ratings Incandescent -
Minimum Load: 40W,
Maximum Load: 600W
Motor – 1/2HP
Resistive – 1800W
Range Up to 100 feet line
of sight between the
wireless controller
and the closest Z-Wave
receiver module.
Operating
Temp. Range
32°F~104°F (0°C~40°C)
For indoor use only.
Power 120VAC, 60Hz
Signal
(Frequency)
908.42 MHz
Minimum Load 40W, incandescent lamps
only
Maximum Load 500W, incandescent lamps
only
Range Up to 100 feet line
of sight between the
wireless controller
and the closest Z-Wave
receiver module.
Operating
Temp. Range
32°F~104°F (0°C~40°C)
For indoor use only.
Power 120VAC, 60Hz
Signal
(Frequency)
908.42 MHz
Maximum Load
for the Z-Wave
Controlled
Outlet
600W Incandescent,
½ HP Motor or
1800W (15A) Resistive
Maximum Load
for Both Outlets
1800W Resistive
Range Up to 100 feet line
of sight between the
wireless controller
and the closest Z-Wave
receiver module.
Operating
Temp. Range
32°F~104°F (0°C~40°C)
For indoor use only.