Data Sheet

g
GE
Security
Product Data Sheet
GS600
Minitec shock sensor
Mini inertia sensor
The GS600 is a miniature 4-wire inertia shock sensor.
The GS600 can be mounted vertically or horizontally
on any vertical structure such as walls, windows and
doors. When the sensor is mounted in the vertical
position, with the cable entering from below or
above, the sensor is in its highest sensitivity position.
When mounted horizontally, with the cable coming
in from the side, the sensor is mounted in a damped
position.
Easy installation
The GS600 is provided with a 2m 4-core cable, the
blue and yellow wires are a tamper loop. The
sensors are designed to be connected in series with
the analysers GS614 or GS615.
The design of the sensor case allows the cable to
enter through the back of the sensor housing, which
enables a clean installation with no cable showing at
the sensor head.
Performance
The good performance is achieved by means of
precisely turned gold-plated rings with a gold-plated
inertia mass placed through their centres, all resting
on two precision made gold rails.
The GS600's unique design enables each ring to
rotate independently. After each shock, a wiping
action cleans the 16 contact points while at the
same time retaining equal contact pressure. The
sensor is hermetically sealed in an ABS plastic
housing.
Standard Features
Reliable 24 hour loop perimeter protection
E
Miniature attractive design
E
Pre-wired 2m cable
E
Suitable for all types of solid structures
E
24 carat gold plated internal mechanics for optimum
performance & long life
E
Two analysers available; GS614 & GS615
E