User Manual User Manual

Table Of Contents
IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
13
DSCP remarking
¾ Multicast
Supports IGMP Snooping v1, v2 and v3
Querier mode support
IGMP Snooping port filtering
Multicast VLAN Registration (MVR) support
¾ Security
IEEE 802.1x Port-Based / MAC-Based network access authentication
Built-in RADIUS client to co-operate with the RADIUS servers
TACACS+ login users access authentication
RADIUS / TACACS+ users access authentication
IP-Based Access Control List (ACL)
MAC-Based Access Control List
Source MAC / IP address binding
DHCP Snooping to filter un-trusted DHCP messages
Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
IP Source Guard prevents IP spoofing attacks
Auto DoS rule to defend DoS attack
IP address access management to prevent unauthorized intruder
¾ Management
Switch Management Interfaces
- Console / Telnet Command Line Interface
- Web switch management
- SNMP v1, v2c, and v3 switch management
- SSH / SSL secure access
Four RMON groups (history, statistics, alarms, and events)
IPv6 IP Address / NTP / DNS management
Built-in Trivial File Transfer Protocol (TFTP) client
BOOTP and DHCP for IP address assignment
Firmware upload/download via HTTP / TFTP
DHCP Relay
User Privilege levels control
NTP (Network Time Protocol)
Link Layer Discovery Protocol (LLDP) Protocol
Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues
Reset button for system reboot or reset to factory default
IFS Smart Discovery Utility for deploy management
ICMPv6
¾ Stacking
Hardware stack up to 16 units and 384 ports
Stacking architecture supports Chain and Ring mode
Mirror across stack
Link Aggregation groups spanning multiple switches in a stack
Hardware learning with MAC table synchronization across stack
¾ Power over Ethernet (NS3601-24P/4S / GE-DSSG-244-POE)
Complies with IEEE 802.3af Power over Ethernet End-Span PSE
Up to 24 ports for IEEE 802.3af devices powered
Support PoE Power up to 15.4 watts for each PoE ports
Auto detect powered device (PD)
Circuit protection prevent power interference between ports
Remote power feeding up to 100m
PoE Management
Total PoE power budget control
Per port PoE function enable/disable
PoE Port Power feeding priority
Per PoE port power limit
PD classification detection