Installation Instructions

Table Of Contents

P/N 1069667 • REV 1.0 • ISS 22FEB10 9 of 13

Figure 9: Login request window

Now you can configure the Switch by Telnet.

Web Browser Setup

Start Web Management

The following shows how to start up the Web Management of the GE-DSG/GE-

DSSG Managed Switch. Please note that the Managed Switch is configured

through an Ethernet connection, make sure the manager PC must be set on the

same IP subnet address.

For example, the default IP address of the GE-DSG/GE-DSSG Managed Switch is

192.168.0.100, then the manager PC should be set at 192.168.0.x (where x is a

number between 1 and 254, except 100), and the default subnet mask is

255.255.255.0.