User Manual

4. Change the Connect using drop-down menu to TCP/IP (Winsock) then
input the Host address. The Managed Switches default IP address is
192.168.0.100 and the default telnet port number is 23, then press the
OK button.
Figure 6: The
Connect to
dialog
window
Log on to the Console
Make sure the device has finished booting. Once telnet has connected to the
device, the Hyper terminal will display the login request.
The following message asks for the login username and password. The
factory default password username and password is:
User name: admin
Password: admin
P/N 1069669-EN • REV 1.01 • ISS 19AUG10 7 of 11