TruVision DVR 42 Quick Start Guide P/N 1072663C-EN • REV 1.
Copyright © 2014 United Technologies Corporation. Interlogix is part of UTC Building & Industrial Systems, a unit of United Technologies Corporation. All rights reserved. Trademarks and Trade names used in this document may be trademarks or registered patents trademarks of the manufacturers or vendors of the respective products. Contact www.interlogix.com or www.utcfssecurityproducts.
EN TruVision DVR 42 Quick Start Guide Figure 1: Back panel connections 1. Connect up to 16 analog cameras (depends on the DVR model). 2. Connect up to 16 audio inputs to RCA connectors. 3. Connect up to two CCTV monitors: Spot and main monitors 4. Connect to speakers for audio output. 5. Connect RCA connector to a microphone. 6. Connect to a RS-232 device. 7. Connect one CCTV monitor (BNC-type connector). 8. Connect to an optional eSATA device such as SATA HDD, CD/DVD-RM. 9. Connect to a HDTV.
Figure 2: Front panel controls 1. USB port. 2. Press to eject CD/DVD disc. 3. Press to enter quick archive mode. Press twice to start archiving. 4. Insert CD or DVD disc. 5. Press Display to select the viewing mode (multiview or full screen), A / B to select the monitor, Seq to start/stop sequencing. 6. IR receiver. 7. Press to switch between different cameras in live view, PTZ control, or playback modes. 8. Status LEDs.
Package contents The TruVision DVR 42 (model TVR 42) is shipped with the following items: • IR (infrared) remote control • Two AAA batteries for the remote control • AC power cords (US, Europe, UK) • USB mouse • TVR 42 • Video loop through cable • CD with software and manuals • TruVision DVR 42 Quick Start Guide • TruVision DVR 42 User Manual (on CD) • TruVision Recorder Operator Guide (on CD) Installation environment Refer to the user manual for detailed information, but observe these
IR remote control The IR remote control buttons are similar to those on the front panel. Place the two AAA batteries in the remote control. To access the unit, open a web browser and enter the IP address assigned to the DVR as a web address. In the log on screen, enter the default user ID and password: To connect the remote control to the DVR: • User ID: admin • Password: 1234 1. Press Menu on the front panel or right-click the mouse and select Menu. The main menu screen appears.
appears. See Figure 3 on page 2 for a description of the functions available. Configures alarm settings. Configuring the TVR 42 Configures PTZ settings. The TVR 42 has an icon-driven menu structure that allows you to configure the unit’s parameters. Each command icon displays a screen that lets you edit a group of settings. Most menus are available only to system administrators. Configures user settings. Configures system settings.
