Installation Instructions
Table Of Contents
Resetting the IP Address
To reset the IP address to the default IP Address "192.168.0.100" or reset
the login password to default value. Press the hardware reset button on the
front panel for about 10 seconds. After the device has rebooted, you can
login to the WEB Management interface within the same subnet of
192.168.0.xx.
Figure 11: Reset button
Contact information
Thank you for purchasing UTC Fire & Security products. You can browse our
online FAQ resource at our website first to check if it could solve you issue. If
you need more support information, please contact your local support team.
For contact information, see our Web site: www.interlogix.com.
Contents subject to revision without prior notice.
P/N 1069669-EN • REV 1.01 • ISS 19AUG10 11 of 11