Data Sheet

DT/DR3000
Series
8
-Channel Contact Mapping
Tr
ansmitters and Receivers
IFS
®
Line / Fiber Transmission
interlogix.com
STANDARD FEATURES
• Transmits Up to Eight Contact Closures Over One Fiber
• Eight Channel Point-to-Point Transmission Architecture
• Power and Eight Individual Channel Status LED Indicators
• Eight SPST Reed Relays (with individual indicators)
• Exceeds the Environmental Requirements of NEMA TS-1/TS-2 &
Caltrans Specifications (Temperature/Humidity, Shock/Vibration,
and Voltage Transient Protection) for Traffic Control Equipment
• Microprocessor-based logic and battery back-up in receiver unit
eliminate random contact closure status in the event of loss of
optical fiber path or loss of prime operating power
• Loss of Carrier Relay for Alarm Notifications
• Relay Contact Rating: 200VDC, 0.5Amps, Normally Open
• No In-field Electrical or Optical Adjustments Required
• Automatic Resettable Solid-State Current Limiters
• Hot-Swappable Rack Modules
• Distances up to 25 Miles (40km)
• Comprehensive Lifetime Warranty
DT3010 DR3010
8
Contacts in
8
Contacts out
1 Fiber
62.5/125μm MM
up to 2.5 miles
(4 km)
ifs
International
Fiber
Systems
Incorporated
203.426.1180
ifs
International
Fiber
Systems
Incorporated
203.426.1180
Specifications
System Design
Data
Input/Output Channels: 8
Contacts: 200 VDC, 0.5 amp, 12 watts, normally open
Response Time: 25 msec maximum
Wavelength DT3010, DR3010: 850 nm, MM DT3020: 1310 nm, MM
DT3025, DR3030: 1310 nm, SM DR3030: 1310 nm, MM or SM
NumberOfFibers 1
Connectors
Data and Power: Terminal Block with Screw Clamps
Optical: ST or FC (see ordering information)
ElectricaL& Mechanical
Power:
Sur face Mount: 12 VDC @ 150 mA
Rack: From Rack
Number of Rack Slots: 2
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Sur face Mount: 7.0 x 4.9 x 2.0 in., 17.8 x 12.5 x 5.0 cm
Rack Mount: 7.0 x 5.0 x 2.0 in., 17.8 x 12.7 x 5.0 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
*
Storage Temp:
-40° C to +85° C
*
Operating Temp:
-10° C to +45° C
s
Storage Temp:
-20° C to +35° C
s
Relative Humidity:
0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to
model number for conformal coating.
*
W/O Battery
♦
W/ Battery
PartNumber Opt.Pwr.Budget Max.Distance*
Multimode
62.5/125μm**
Single Mode
9/125μm
2.5 miles (4 km)
8 miles (13 km)
25 miles (40 km)
DT3010
DR3010
DT3020
DR3020
DT3025
DR3030
1
1
FibersRequired
13 dB
14 dB
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦ All accessories are third party manufactured.
Contact Mapping Transmitter (850 nm)
Contact Mapping Receiver (850 nm)
Contact Mapping Transmitter (1350 nm)
Contact Mapping Receiver (1350 nm)
Contact Mapping Transmitter (1350 nm)
Contact Mapping Receiver (1350 nm)
Accessories♦
Options
Description
Ordering Information
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
Add ‘-B’ for DR Battery Backup
GE
Security
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
North America
T 888-GE-SECURIT Y
888-437-3287
F 503-691-7566
E [e-mail]
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 32-2-719-9847
F 32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
© 2008 General Electric Company
All Rights Reserved
Agency compliance
OVERVIEW
The IFS DT/DR3000 Series contact mapping transmitter and
receiver provides transmission of up to eight independent contact
closures over one optical fiber. Utilizing micro processor-based logic
for exceptionally robust communications channel redundancy, and
a trickle-charged nickel-cadmium (NiCd) battery back-up memory
within the receiver module, the DT/DR3000 Series eliminates the
possibility of any of the relay contacts returning to a random resting
state in the event of an optical fiber breakage or loss of prime
operating power at the receiver end of the link. Models within this
series are available for use with multi mode or single mode optical
fiber. Plug-and-play design ensures ease of installation requiring no
electrical or optical adjustments. Each module incorporates power
and individual status indicating LED’s for monitoring confirmation
of contact closure of each of the eight channels. The modules are
available in either stand-alone or rack mount versions.
APPLICATION EXAMPLES
• Alarm Event Triggering
• Building Automation & Environmental Control Systems
• Lane/Gate Control
• Fire & Alarm Systems
• PIR Signal Transmission
SYSTEM DESIGN