DECT3000 DECT3020 DECT3030 DECR3000 DECR3020 DECR3030 IFS Fiber Module Installation & Operation Instructions P/N 1062840 • REV B • ISS 01AUG11
DECT3020 8 CHANNEL CONTACT TO ETHERNET LNK ACT TRANSMITTER CLOSED WITH POWER ON 9 TX 100FX RX 2 1 4 3 6 5 8 7 CONTACT CLOSED WHEN ON ifs CONTACT 8 8 International CONTACT 7 7 Fiber CONTACT 6 6 Systems CONTACT 5 5 Incorporated CONTACT 4 4 CONTACT 3 3 CONTACT 2 2 CONTACT 1 1 9 8 7 6 5 4 3 2 1 LOS POWER -2 POWER + 12 VDC - 1 Black wire Black with white stripe Duplex multimode fiber optic cable DECR3020 8 CHANNEL CONTACT TO ETHERNET LNK ACT RECEIVER CLOSED WITH POWER
DECT/DECR3000 H F Left Side D B J N L K A G A B C D E F G H I J K L E C Contact 8 Closed Contact 7 Closed Contact 6 Closed Contact 5 Closed Contact 4 Closed LED illuminates Contact 3 Closed Contact 2 Closed Contact 1 Closed Loss of Signal (optical) Blinks w/Data Transfer Network Activity OFF: 10 Mbps ON: 100 Mbps Link Speed Network Connection (optical) LED illuminates M Power N Network Connection (electrical) M I
Initializing the DECT/DECR3000 Upon power up and network connection into the DECT3000, the address factory default is 192.168.1.200. The DECR3000 address factory default is 192.168.1.220 The units network address must be configured prior to connecting any contacts. Opening the web browser to the default address, the log on screen will be displayed. LoginID: admin Password: 123456 This will open the network device parameters.
Initializing the DECT/ DECR3000 continued Assign a new network address by either user selection or enabling the DHCP. Note this address for future reference, it will be needed to "assign" the units to each other.
FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Changes or modifications not expressly approved by International Fiber Systems, Inc. could void the user’s authority to operate the equipment.
Contacting us For help installing, operating, maintaining, and troubleshooting this product, refer to this document and any other documentation provided. If you still have questions, contact us during business hours (Monday through Friday, excluding holidays, between 5 a.m. and 5 p.m. Pacific Time). Sales and support contact information North America Toll-free: 855.286.8889 in the US, including Alaska and Hawaii; Puerto Rico; Canada. Outside the toll-free area: 503.885.5700.
Copyright Trademarks and patents Manufacturer Certification ACMA compliance Canada European Union directives © 2011 UTC Fire & Security. All rights reserved. Interlogix and IFS names and logos are trademarks of UTC Fire & Security. Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products. UTC Fire & Security Americas Corporation, Inc.
