Data Sheet

D7100 Series
IFS 10/100 Mbps
Ethernet Optical Transceiver
IFS
®
Line / Fiber Transmission
interlogix.com
OVERVIEW
The IFS D7100 Series ethernet transceiver is designed to transmit
and receive 10 or 100 Mbps data over multimode or single mode
fiber. The IFS D7100 Series will function as a 10 Mbps Ethernet
link, or as a 100 Mbps Ethernet link without any adjustments.
T
he D7100 Series is environmentally hardened to operate in extreme
temperatures. Status indicating LED’s for power and data type are
present at the RJ-45 connector and at the fiber optic transceiver
end. Plug-and-play design ensures ease of installation requiring no
electrical or optical adjustments. The modules are available in either
stand-alone or rack mount versions.
APPLICATION EXAMPLES
• 10/100 Mbps Ethernet
• High Speed Computer Links
SYSTEM DESIGN
STANDARD FEATURES
• 10/100 Mbps Ethernet
- Auto-Negotiating
- 10/100 Selectable
- Full Duplex or Half Duplex Data
• Auto Network Detection MDI/MDI-X
• Distances up to 45 km (28 miles)
• NTCIP Compatible
• Tested and Certified by an Independent Testing Laboratory for Full
Compliance with the Environmental Requirements
(Ambient Operating Temperature, Mechanical Shock, Vibration,
Humidity with Condensation, High-Line/Low-Line Voltage
Conditions and Transient Voltage Protection) of NEMA TS-1/TS-2
and the Caltrans Specification for Traffic Signal Control Equipment.
• Multimode and Singlemode Versions Available
• ST Optical Connectors Standard
• No In-field Electrical or Optical Adjustments Required
• Power, Transmit and Receive Data Status LED Indicators
• Hot-Swappable Rack Modules
• IEEE 802.3 Compliant
• Comprehensive Lifetime Warranty
09/19/07
3 miles (5 km)
28 miles (45 km)
MAX.
DISTANCE*
TRANSCEIVER
SYSTEM DESIGN
DATA
Data Interface: Ethernet
Data Rate: 10/100 Mbps
IEEE 802.3 Compliant
Full Duplex or Half Duplex
WAVELENGTH
D7120 1310 nm, Multimode
D7120WDM 1310/1550 nm, Multimode
D7130WDM 1310/1550 nm, Singlemode
NUMBER OF FIBERS 1 or 2
CONNECTORS
Optical: ST
Power: Terminal Plug with screw clamps
Data: RJ-45
ELECTRICAL & MECHANICAL
Power:
Surface Mount: 12 VDC @200 mA
Rack: From Rack
Number of Rack Slots: 2
Voltage Regulation: Solid-state; independent on each board
Current Protection: Automatic Resettable Solid-State Current
Limiters
Circuit Board: Meets IPC Standard
Size (in./ cm.) (LxWxH):
Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm.
Rack Mount: 7.7 x 5.0 x 2.0 in., 19.6 x 12.7 x 5 cm
Shipping Weight: < 2 lbs./0.9 kg
ENVIRONMENTAL
MTBF: >100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
† May be extended to condensation conditions by adding suffix ‘–C’ to model
number for conformal coating.
SPECIFICATIONS
TEL [phone] ■ FAX [phone] ■ www.ifs.com ■ [e-mail]
16 Commerce Road
■ Newtown, CT 06470
Due to our continued effort to advance technology, product specifications are subject to change without notice.
D7100 SERIES
10/100 Mbps ETHERNET OPTICAL TRANSCEIVER
OPTICAL POWER BUDGET
FIBER
WAVELENGTH
OPTICAL
PWR BUDGET
MODEL
Multimode
62.5/125µm**
D7120
D7120WDMA (1310/1550 nm)
D7120WDMB (1550/1300 nm)
D7130WDMA (1310/1550 nm)
D7130WDMB (1550/1310 nm)
10 dB
15 dB
Singlemode
9/125µm
1310 nm
1310/1550 nm
1310/1550 nm
TECHNICAL SPECIFICATION
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
2 Fibers
62.5/125µm MM
up to 1.2 miles
(2 km)
D7120
D7120
ifs
ifs
AGENCY COMPLIANCE
MADE IN THE USA
Federal Supply Schedule
Contract No. GS-07F-0049M
Complies with FDA Performance Standard for Laser Products,
Title 21, Code of Federal Regulations, Subchapter J
10 dB
1.2 miles (2 km)