D1315 D1315WDM D2315 D2315WDM IFS Fiber Module Installation & Operation Instructions P/N 1062851 • REV B • ISS 01AUG11
D1315 / D2315 4 - Wire RS485 Connection 4 3 2 1 - Data Output + Data Output - Data Input + Data Input
D1315 RS485 OUTPUT DATA REC DATA XTMR POWER INPUT ifs } To D1315 or D2315 series module + DATA - 3 - DATA - 2 + DATA - 1 International Fiber Systems Incorporated POWER Duplex multimode fiber optic cable - DATA - 4 GRD - 2 12VAC/12VDC - 1 Black wire Black with white stripe
To D1315 or D2315 series module } Duplex multimode fiber optic cable D2315 RS485 OUTPUT DATA REC INPUT - DATA - 4 + DATA - 3 - DATA - 2 + DATA - 1 A DATA XTMR ifs POWER International Fiber Systems Incorporated DATA REC B DATA XTMR Duplex multimode fiber optic cable } To D1315 or D2315 series module POWER GRD -2 12VAC/12VDC -1 Black wire Black with white stripe
NOTE: WITHOUT PROPER FIBER CONNECTION, LED's DO NOT INDICATE CORRECT OPERATIONAL STATUS OF THE UNIT.
D1315 / D2315 B A 1 2 1 A Power Connector B Data Connector 2 3 4
FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Changes or modifications not expressly approved by International Fiber Systems, Inc. could void the user’s authority to operate the equipment.
Contacting us For help installing, operating, maintaining, and troubleshooting this product, refer to this document and any other documentation provided. If you still have questions, contact us during business hours (Monday through Friday, excluding holidays, between 5 a.m. and 5 p.m. Pacific Time). Sales and support contact information North America Toll-free: 855.286.8889 in the US, including Alaska and Hawaii; Puerto Rico; Canada. Outside the toll-free area: 503.885.5700.
Product Disassembly Instructions for WEEE Per European Directive 2002/95/EC Waste Electrical and Electronic Equipment Required Tools: One number 2 Phillips (crosstip) screwdriver. One number 2 flat screwdriver. For the enclosed box version: 1. Locate and remove box cover securement screws. Usually, but not limited to, at least 4 screws. 2. Lift off box top cover. 3. Locate and remove securement screws for printed circuit board. 4.
Copyright Trademarks and patents Manufacturer Certification ACMA compliance Canada European Union directives © 2011 UTC Fire & Security. All rights reserved. Interlogix and IFS names and logos are trademarks of UTC Fire & Security. Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products. UTC Fire & Security Americas Corporation, Inc.
