Owner manual

6
1elbaT
METSYSECRUOSREWOP
LXM21-95BT;5-41BT:2-BMM
21-95BT;-,+9BT:3-BMM
6-3;2-13BT:1-RSP
SLXredniFeriF-,+4BT:21-CSP
-,
+4BT:21-XSP
ECRUOSREWOP
3-DAP-,+XUA
53-SP6-51BT
ELUDOM
CDV42EVITCA
ELUDOM
TNERRUCYTITNAUQLATOT
1-MCAAm58
1-CSAAm14
2-CSAAm16
003-IMCAm0
4-MRCAm57
4-MSC
xamA5.1+Am43
ti
ucricrep
4-MZC
Am027
mralanisenoz4
SPC0032DAm75
4-/2-BKMAm0
4-TENAm0
7-TENAm0
M7-TENAm0
7-IOMAm021
61-DOMxamAm058
61-DI
MxamAm23
1-MIPAm0
1-CTBAm44
1-MCRAm031
03-CAZW03taA3
1-CCOAm71
B8-1CZAm071
B8-2CZAm243
BA4-2CZAm761
BA4-3CZAm861
B8-TCZAm8
7
LATOT
For non-power limited wiring, the PLM-35 (Installation
Instructions P/N 315-093495) must be used to comply
with NFPA 70 per NEC 760. All wiring must be in
accordance with Article 760 of NEC or local building
codes.
For additional information on the MXL/MXLV System,
refer to the MXL/MXLV Manual, P/N 315-092036.
24 VDC CURRENT CALCULATION (MXL ONLY)
The 24 VDC output ratings for the MMB/SMB and PSR-1 are:
MMB-2/-3 6A at 24 VDC (MPS-6); 12A at 24 VDC (MPS-12)
SMB-2 6A at 24 VDC (MPS-6); 12A at 24 VDC (MPS-12)
PSR-1 6A at 24 VDC (MPS-6); 12A at 24 VDC (MPS-12)
The following modules all draw current from the 24 VDC supply. Add the value for each module that is installed in
the enclosure where the D2300CPS is to be installed. Be sure to include the D2300CPS in this calculation.