D2100 D2100WDM D2120 D2125 IFS Fiber Module Installation & Operation Instructions P/N 1062849 • REV B • ISS 01AUG11
D2100 RS-232 DATA RS-422 DATA 7 6 5 4 3 2 1 7 6 5 4 3 2 1 Data Out Data In Ground - Data Out + Data Out - Data In + Data In
D2100 OFF ON 1 2 3 4 5 6 7 8 } 8 7 6 5 4 3 2 1 Not Used } Not Used PRIMARY PORT (A) REPEATER PORT (B) 8 RECEIVE TRANSMIT 7 TRANSMIT RECEIVE 6 SWITCH 5 4 3 3 4 5 NOTES: (1) To configure as a repeater, switches 4, 5, 6, and 8 should be turned ON and all others OFF. (2) Switches 1 and 2 are not used and must be in OFF Position. OUT IN 6 7 8 FUNCTION Optical receive on B drops electrically. Optical receive on A drops electrically. Electrical input transmits optically on A.
To D1010 or D2100 series module } Duplex multimode fiber optic cable D2100 FIBER OPTIC NETWORK LINK RECEIVER - DATA OUT - 7 RS422 TRANSMITTER A ifs TRANSMIT RECEIVE POWER RECEIVER International Fiber RS232 Systems + DATA IN - 4 }RS422 Output }RS422 Input DATA OUT - 3 RS232 Output + DATA OUT - 6 - DATA IN - 5 DATA IN - 2 GRD - 1 Incorporated SW 1 TRANSMITTER B TRANSMIT RECEIVE Duplex multimode fiber optic cable } To D1010 or D2100 series module }RS232 Input POWER +12 VDC + - 2 -1 }
D2100 A J B C D E L K 1 A B C D E F G H I J K L F 2 1 2 3 Data Receiver Channel A Data Transmitter Channel A Data Transmit Channel A Data Receive Channel A Power Data Receiver Channel B Data Transmitter Channel B Data Transmit Channel B Data Receive Channel B Power Connector Configuration Switch Data Connector 4 5 6 7 LED illuminates LED illuminates LED illuminates LED illuminates LED illuminates NOTE: WITHOUT PROPER FIBER CONNECTION, LED's DO NOT INDICATE CORRECT OPERATIONAL STATUS OF
FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Changes or modifications not expressly approved by International Fiber Systems, Inc. could void the user’s authority to operate the equipment.
Contacting us For help installing, operating, maintaining, and troubleshooting this product, refer to this document and any other documentation provided. If you still have questions, contact us during business hours (Monday through Friday, excluding holidays, between 5 a.m. and 5 p.m. Pacific Time). Sales and support contact information North America Toll-free: 855.286.8889 in the US, including Alaska and Hawaii; Puerto Rico; Canada. Outside the toll-free area: 503.885.5700.
Product Disassembly Instructions for WEEE Per European Directive 2002/95/EC Waste Electrical and Electronic Equipment Required Tools: One number 2 Phillips (crosstip) screwdriver. One number 2 flat screwdriver. For the enclosed box version: 1. Locate and remove box cover securement screws. Usually, but not limited to, at least 4 screws. 2. Lift off box top cover. 3. Locate and remove securement screws for printed circuit board. 4.
Copyright Trademarks and patents Manufacturer Certification ACMA compliance Canada European Union directives © 2011 UTC Fire & Security. All rights reserved. Interlogix and IFS names and logos are trademarks of UTC Fire & Security. Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products. UTC Fire & Security Americas Corporation, Inc.
