Advisor TouchScreen Installation Sheet With End User Quick Guide Tear-Out Sheet EN CNF ES PR Figure 1. Advisor TouchScreen Figure 2. Connecting the Ethernet Cable from Advisor Panel to Advisor TouchScreen Figure 3. Connecting the Power Supply Figure 4. Wall Mount Bracket ` Figure 5.
English: Installation Sheet Description The Advisor™ family of life-safety protection and comfort management systems detects situations and provides control and information to home and small business owners. This document provides instructions on installing and programming the Advisor TouchScreen 7” (P/N AV-TS7) for use with an AdvisorOne panel. Note: Contact Interlogix Technical Support for other Advisor panels. The Advisor TouchScreen extends the control and accessibility of an Advisor panel.
8-7. Optionally edit any of the following on the TouchScreen Properties screen: Option Description Name Press the field next to Name to enter the desired name for the TouchScreen. Press DONE to save the name. CAR Code Access Required. When enabled, a passcode is required for any access. In less secure areas, like a garage, enable this setting. For more secure areas, this setting can be disabled. Partitions Press the icon next to Partitions to edit the partitions that can access this TouchScreen.
11-9 For a wired LAN installation using CAT5 cable connected to the TouchScreen, connect the other end of the CAT5 cable to the Advisor panel LAN port and/or network switch. If using WiFi, disregard this step. For Mounting on a Table with the Tabletop Stand: 12-1. Attach the four rubber feet (provided) to the bottom of the tabletop stand (if not already attached). 12-2. Connect the power plug and Ethernet CAT5 (if used) to the Advisor TouchScreen.
• For a wireless LAN installation using Wi-Fi: Wi-Fi may not have had time to be configured before the wired connection was removed. Check the status: config/devices/IP devices/TouchScreen Name/Status. Verify that the wireless status is operational. If not, reconnect the CAT5 cable between the panel and Advisor TouchScreen and wait until the wireless status indicates it is operational, at which time the CAT5 cable can be safely removed.
Regulatory Information This product does not meet UL requirements and therefore may not be sold and/or installed in some localities. Consult local authorities concerning appropriate use. Industry Canada Compliance IC: This Class B digital apparatus complies with Canadian ICES-003. This device complies with Industry Canada license-exempt RSS standard(s).
Note to Dealer / Installer The following page is information intended for the user of the Advisor TouchScreen. Remove and separate the following page and leave behind.
Advisor TouchScreen Quick Guide The Advisor TouchScreen is a companion product to the Advisor security system. The Advisor TouchScreen can be used to extend access and control of the Advisor system to other locations within a building. This Quick Guide provides high level information for the Advisor TouchScreen. For more detail or for information on the Advisor system in general, please refer to the Advisor User Guide.
