Data Sheet

Simon 3
GE
Security
Intrusion
Simon 3
affordable, reliable security featuring
Learn ModeTechnology
Overview
Simon 3 is a low-cost security panel that offers up to 24 zones of
burglary and fire protection and complies with SIA False Alarm
Standards. With a built-in touchpad and status speaker that provides
voice messages for feedback, Simon 3 is well-suited for houses,
apartments, and condominiums.
The Simon 3 panel comes standard with 24 wireless zones, or can be
set up with 22 wireless zones and two built-in hardwired supervised
burglary zones (normally-closed loop only). The built-in radio receiver
works with both Crystal and SAW Learn Mode sensors.
Use remote phone control to arm and disarm the system, check
system status, activate no entry delay, or activate the latchkey
feature. With latchkey capabilities, the panel can be programmed to
notify customers if the system has not been disarmed at a scheduled
time.
Convenient and expandable
Add convenient system operation from anywhere within the premises
with wireless touchpads. Choose from the Remote Handheld
Touchpad, Dialog 2-Way RF Touchpad, 2-, 4-, or 5-Button SAW
Keychain Touchpads, 2- or 4-button Crystal Keychain Touchpads,
or 2-Button ELM (encrypted learn mode) Keychain Touchpad. ELM
technology secures every keychain touchpad transmission. When
powered by the optional line carrier transformer, adding X10
®
modules lets customers control lights, appliances, and other devices.
The Dialog RF Electronic Thermostat provides a money-saving and
convenient way to monitor and control temperatures by integrating
heating and cooling features into a security system.
Enhanced monitoring
Simon 3 can send messages to a central monitoring station using
SIA or contact ID (CID) formats, or to a numeric pager carried by
a designated user. The panel can also report alarms to another
land-line phone location or cell phone using Voice Event Notification.
Built-in 2-way voice capability with VOX (voice-activated switching)
provides additional security and emergency contact with the control
monitoring station (60-875-11-3 only).
Effortless programming
System programming can be done from the panel using the built-in
touchpad, or off-site using ToolBox
®
downloader software (version 5.4
and later).
Standard Features
24 wireless zones two can be hardwire (normally-closed loop only)
Supports both Crystal and SAW Learn Mode sensors
Supports repeaters
Supports Dialog 2-Way RF products
Indoor and outdoor motion sensors
Chime feature for monitoring door, window, or motion activity
1 master access code and 5 programmable user access codes of
3 to 6 digits
SIA or CID central station reporting formats and Voice Event
Notification reporting
Program No Activity and No Usage Report features
Built-in 2-way voice with VOX (model 60-875-11-3 only)
Meets SIA False Alarm Standards
100-event buffer with time and date stamp
Disable panel voice and beeps
Program panel with built-in touchpad or ToolBox software
Optional table-mounting base

Summary of content (2 pages)