Data Sheet

ShatterPro
Glassbreak Sensors
5845 series wireless acoustic
glassbreak sensors
North America
T 855-286-8889
Asia
T 852-2907-8108
Australia
T 61-3-9239-1200
Europe
T 32-2-725-11-20
Latin America
T 561-998-6114
interlogix.com
Ordering Information
584503-W
ShatterPro,
™
wireless, 3 V, with mounting bracket,
transmitter not included
584509-W
ShatterPro, wireless, 9 V, with mounting bracket,
transmitter not included
NX-488
ShatterPro, wireless, 319.5 MHz, crystal transmitter, compatible
with all NetworX panels, 5-year battery included
60-873-95
ShatterPro, wireless, 319.5 MHz, crystal transmitter, compatible
with all 319.5 MHz Learn Mode
™
panels, 5-year battery included
5709C-W ShatterPro handheld glassbreak tester
Specifications
Voltage 3V sensor: 2.8 to 4.5 VDC
9V sensor: 6 to 16 VDC
Current 3V sensor: 17 μA typ.
9V sensor: 23μA typ.; 5 mA with LED on
Relay Output 3V sensor: Normally closed and normally open
9V sensor: Normally low with NPN transistor and 10
mOhms pull up resistor; normally high with PNP transistor
to power 16 VDC max.
Resistance, normal (closed) 700 ohms max.
Resistance, alarm (open) 10 mOhms min.
Alarm Duration 4 sec.
Transmitter Options Models: NX-488; 60-873-95
Battery: Duracell DL 123A 3 V lithium, 5 years typ.
Transmitter frequency: 319.5 MHz
Transmitter conditions: Alarm, tamper, low battery
supervisory
Glass Thickness Up to 1/4 in. (6.4 mm) for plate, tempered, laminated and
wired glass
Min. Distance from Glass 4 ft. (1.2 m)
Range 20 ft. (6 m) x 360°
Microphone Omni-directional 360° electret
Sensitivity Factory set
Operating Temperature 14 to 120°F (-10 to 50°C)
RFI Immunity 20 V/meter from 1 to 1000 MHz
Dimensions (HxWxD) Sensor: 3.13 x 4.24 x 1.70 in. (80 x 108 x 43 mm)
Bracket: 2.10 x 2.94 x 1.12 in. (53 x 75 x 28 mm)
Housing Flame-retardant ABS plastic
Color White
Mounting Location Ceiling or any wall adjacent or opposite glass
Specifications subject to change without notice.
© 2013 Interlogix.
All rights reserved.
Interlogix is part of UTC Climate, Controls & Security,
a unit of United Technologies Corporation.
305-3661 2013/06 (74801)
Dimensional Diagram
4.24 in.
(108 mm)
1.70 in.
(43 mm)
3.13 in.
(80 mm)
1.12 in.
(28 mm)
2.94 in.
(75 mm)
2.10 in.
(53 mm)
4.24 in.
(108 mm)
1.70 in.
(43 mm)
3.13 in.
(80 mm)
1.12 in.
(28 mm)
2.94 in.
(75 mm)
2.10 in.
(53 mm)
Sensor module with back box
Sensor module with mounting bracket