Data Sheet

S E N T R O L

P R O D U C T I N F O R M A T I O N B U L L E T I N

The 5400 Series glassbreak shock sensor mounts

on windows or doors, either on the frame or on the glass.

The 5400 Series responds to the shock waves that are

created when the protected glass is broken. Adjustable

sensitivity allows each installation to be fine-tuned,

enhancing the sensor’s detection and minimizing nuisance

alarms.

The 5400 Series mounts quickly using special adhesive

strip or screws. The tape, formulated by 3M

, has been

field-tested with proven reliability.

The 5400 shock sensor is ideal for rooms where acoustic

sensors are not practical, such as acoustically live rooms,

small glass rooms, on glass mounted near kitchen sinks, in

high noise areas, and on a 24-hour loop.

Sensor range is up to 10' (3.5 m). Optional magnetic

reed and tamper switches are available. These models are

designed to detect forced openings and glass breaking

with one wire run.

continued

5400 SERIES

SHOCK

GLASSBREAK

SENSOR

Model numbers:

5414, 5415A, 5425,

5426, 5427, 5428

• Mounts on the frame or on the

glass

• Models with internal magnetic

reed switch for double detection

• Adjustable sensitivity for

enhanced detection and reduced

false alarms

• Use for 24-hour loop protection

PAGE 1
S P E R O N D U C T T R I N O F O R L M A T I O N B U L L E T I N 5400 SERIES SHOCK GLASSBREAK SENSOR Model numbers: 5414, 5415A, 5425, 5426, 5427, 5428 • Mounts on the frame or on the glass • Models with internal magnetic reed switch for double detection • Adjustable sensitivity for enhanced detection and reduced false alarms • Use for 24-hour loop protection The 5400 Series glassbreak shock sensor mounts on windows or doors, either on the frame or on the glass.
PAGE 2
Sentrol 5400 Series Glassbreak Shock Sensor Architects' and Engineers' Specifications: The 5400 Series glassbreak sensors shall detect the shock produced from breaking glass. The shock sensors can be mounted to the frame or on the glass. The sensors use a specially mounted piezo element to trigger a solid state circuit into an alarm condition. The output loop opens and an LED lights for 2 to 6 seconds. The output loop shall have a bidirectional normally closed alarm loop.