Reference Manual

DISTRIBUTION: INTERNAL + INTERLINK-U CUSTOMERS

Interlink-U ID Reference Manual

Pin.

It is important to note, that if you do not remove the RIP pin in the 15 second window, the device will once

more begin monitoring for RIP pin removal. This ensures that this function cannot be accidentally

deactivated when it is in fact needed.

Deactivation can be done as follows:

Select the RIP Pin option in the device Settings menu.

You then have 15 seconds during which RIP detection is

temporarily disabled.

During this period, you can remove the RIP Pin without

concerns of raising a false Red Alert.

If the Rip Pin is successfully removed during the 15

second window, the Rip detection feature will be

deactivated.

Rip detection will remain deactivate until you once again

reinsert a Rip Pin into either of the devices Rip Pin ports;

when this is done, the device will inform you that the

function is once more active.

Figure 24: Deactivating the RIP detection feature

Device Status

A user can access detailed information relating to device status from the Settings page. Using the Device

Status feature, you can observe the length of time left on your battery life, the accuracy of your device’s

location, and the quality of the device’s cellular signal. This function can be accessed as follows: