Reference Manual

DISTRIBUTION: INTERNAL + INTERLINK-U CUSTOMERS
Interlink-U ID Reference Manual
© Interlink-U Ltd, 2020 Page 29 of 44
In the settings page, select the ‘Wi-Fi WPS’ option, as
shown.
On the next screen you will see a list of available Wi-Fi
Access Points, here you should select the network you
know to be configured for your device.
The device will indicate on the display when it is
attempting to connect to your selected network.
Your device will make it clear on the screen (as
highlighted) once a connection has been established.
Your device will clearly notify you if the connection fails,
along with an option to retry your connection attempt.
Figure 19: Connecting to a configured Wi-Fi Access Point
The process for connecting to a Wi-Fi Access Point using WPS is slightly different. This functionality can be
activated using the below instructions:
In the settings page, select the ‘Wi-Fi WPS’ option, as
shown.