Reference Manual

DISTRIBUTION: INTERNAL + INTERLINK-U CUSTOMERS

Interlink-U ID Reference Manual

be used to locate the user should GNSS or other services do not provide a location due to a lack of coverage.

4.1.4 Settings

There are various adjustments that can be made to Interlink-U ID from the settings page (using the symbol

on page 2 on the device’s interface). These Settings are detailed below:

Volume

Here a user can adjust the system tones and call volume of the device. The system volume is adjusted for

the Alerts where tone-based indications are in use, and the call volume setting is used to adjust the speaker

volume where 2-way calls are being used.

In the Settings page, select the Speaker Setting Icon (as

highlighted).

The first screen you see here is to adjust the Call volume.

Use the “<” & “>” buttons to select your desired level

and use the Confirm button to apply.

The next screen you see here is to adjust the System

volume. Use the “<” & “>” buttons to select your desired

level and use the Confirm button to apply.

You can exit this menu by completing a long press of the

“<” button.

Figure 17: Altering device volume

Language

A device user can alter the interface language on their Interlink-U ID device; this ensures that no matter

which territory the device is being used in, the user can clearly understand the information that is being

displayed on the screen.

The supported languages are: