Reference Manual

DISTRIBUTION: INTERNAL + INTERLINK-U CUSTOMERS

Interlink-U ID Reference Manual

ARC/Monitoring Center Operator can listen to and/or record the situation.

During an active Incapacitation Alert, your device will periodically vibrate (3 times every 10 seconds); this is

to provide reassurance that the call is active and open, and that someone is listening to and/or recording

events.

If an Incapacitation call is closed accidentally, your device will allow an ARC/Monitoring Center Operator to

dial back into your device discreetly, meaning you cannot accidentally end an alert prematurely. This gives

reassurance that the situation will continue to be monitored until closed.

Activating an Incapacitation Alert

Unlike previous Interlink-U devices, the Incapacitation Alert is not active by default on the Interlink-U ID. A

user is required to manually activate a timer at the beginning of a period for however long they will be

working where a risk of incapacitation is present (can be activated for a minimum of 15 minutes, and up to

a maximum of 8 hours). This is done as follows:

Use the navigation buttons to select the Incapacitation

Alert icon from the device’s screen.

Here you must select the length of time you want the

Incapacitation Timer to be active for. You use the + / -

buttons (as highlighted) to do this.

You must then select the ✓ on the right (as highlighted)

to activate the timer.

Once the timer is active the Incapacitation Timer screen

is displayed which shows the length of time remaining.