Reference Manual

DISTRIBUTION: INTERNAL + INTERLINK-U CUSTOMERS

Interlink-U ID Reference Manual

Powering on the Interlink-U ID:

Please press the power button on the reverse of the unit

to power on the ID.

You will feel a single vibration.

The screen on the rear of your device will show the

Interlink-U ID boot-screen as the device begins to

initialise.

Once completed, the home screen will be displayed.

Typically, this sequence should take no longer than 60

seconds.

Figure 9: Power your device on

When your Interlink-U ID has initialised, it registers with the cellular network and is ready to communicate

to the Alarm Receiving Centre/Monitoring Center.

Power Off Interlink-U ID: