Reference Manual

DISTRIBUTION: INTERNAL + INTERLINK-U CUSTOMERS

Interlink-U ID Reference Manual

4. How to Use your Interlink-U ID

4.1 Functionality

4.1.1 Charging & Powering your Device

You should ensure that your Interlink-U ID is fully charged before use.

We recommend leaving the device on charge for a minimum of 2 hours per day or at the end of each shift

using the Interlink-U supplied charger only. The Alert functions of your Interlink-U ID can still be used while

the device is on charge. Once removed from charge it will power down until you are ready to begin using it.

Interlink-U ID is charged via a USB-Type C connection.

Figure 6: Interlink-U ID charger port

When your Interlink-U ID is connected to the charger, the Battery Symbol (situated top left in the user

interface) on the display will reflect this. As the battery charges, the battery symbol shows more cells.

Figure 7: Battery charging level icons

When you place your device onto charge, or remove it, the screen will “wake up” to indicate the change. If

you put the device on charge while it is powered off, it will display a charging screen, which will time out. A

quick press of the power button will display the charging level once again.

To ensure the ID reaches 100% charge within 2 hours you must ensure you are using the supplied Adapter

which are specially designed to ensure compatibility with your device.