Assembly Instructions

Lay table top on the oor and insert the hanger
bolt on each leg into each corner bracket.
Fasten one lock-nut (Part A) onto each hanger
bolt using the wrench (Part C).
Insert 4 screws (Part B) into the marked holes
on the tabletop by the top base of each leg.
Included Parts:
Lock-nut x 4
Screw x 16
Wrench x 1
Allen Wrench x 1
TO ADJUST LEG HEIGHT—Use the allen wrench (Part D) to remove the two allen screws and lock-washers from the boom side of each upper leg. Once
removed, slide the lower leg to your desired height and then re-fasten the allen screws with lock washers to each upper leg.
Interion® Utility Table
Assembly Instructions
48” x 24” Utility Tables – 695746 GY/WN/RGY/BK
48” x 30” Utility Tables – 695747 GY/WN/RGY/BK
60” x 24” Utility Tables – 695748 GY/WN/RGY/BK
60” x 30” Utility Tables – 695749 GY/WN/RGY/BK
72” x 24” Utility Tables – 695750 GY/WN/RGY/BK
72” x 30” Utility Tables – 695751 GY/WN/RGY/BK