Assembly Instructions

Part List
Key
Description
Qty.
Part
CASTERS
A
5
ARMREST
SCREWS
D 1/4” x L 1 3/8”
BASE
B
1
SEAT CUSHION
C
1
RIGHT
ARMREST
D
1
LEFT
ARMREST
E
1
6
F
G
1
H
4
I
1
J
3
K
1
L
1
MECHANISM
MECHANISM
SCREWS
D 5/16” x L 7/8”
GAS LIFT
ALLEN WRENCH
BACK SUPPORT
SCREWS
D 5/16” x L 5/8”
BACK SUPPORT
ATTENTION: Make certain that all screws are fully tightened before using chair.
Lubricate all moving parts and tighten all screws every 6 months or as needed.
Step 1
Turn Base “B” upside down.
Insert Casters “A” into Base “B”.
Step 2
Attach Right Armrest “D” to Seat Cushion “C” with
Armrest Screws “F” and Flat Washers “G”. Repeat for
Left Armrest “E”. NOTE: Arrows on armrests point to
front of seat cushion and fully tighten all screws.
Step 3
Attach Mechanism “H” to Seat Cushion “C” with
Mechanism Screws “I”.
NOTE: Fully tighten all screws.
Step 4
Attach Back Support “J” to the rear of Mechanism “H”
with Back Support Screws “K”.
NOTE: Fully tighten all screws.
Step 5
Insert Gas Lift “M” into hole on Base “B”.
Step 6
Place seat assembly onto Gas Lift “M”. Push firmly
on the chair seat to securely attach seat assembly to
seat post.
x 5
A
B
x 3
M
D
E
J
ITEM NO.: 695487
ASSEMBLY INSTRUCTIONS
x 3
F
C
F
L
H
I
C
L
x 4
M
B
x 3
K
L
H
FLAT WASHERS
6
M
x 3
G
x 3
G