Specification Sheet

Pivot Wall Mount Blueprint Storage Rack with 12 hangers Model no. 316107
Assembly Instruction
Part no. Description Qty
1 Wall bracket 1
2 Hanger 12
3 Spring 12
4 Drywall Screw 6
Washer 6
2. Guide hangers (part 2) with
springs (part 3) into the top of the
upper frame assembly as shown
in diagram. Push upper end with
spring into upper hole and then
insert lower part of hanger into
bottom hole of rack.
Phillips screwdriver
required for assembly
1. Locate wall studs and attach rack
(part 1) using six (part 4) screws. If you
cannot locate wall studs we
suggest you attach the rack to a solid
wall surface. If you cannot locate the
studs or are unable to attach to a solid
wall surface, we suggest that you have
the rack installed by a professional
using hollow wall anchors.