Installation Instructions

Page
5
LED Display
The LEDs signalize:
- Blue LED light => operational readiness of the reader
- Green LED light => a door opening
- Green LED light and a short “Beep” => positive booking response followed by a door
opening
- Red LED light and “Beeps” repeated at intervals => a negative booking response
Technical Data
Technical Data Details
Power supply:
- Low-voltage
- Power consumption
Via the access manager
5 VDC, +/- 5 %
Max. 100 mA
Interface Wiegand / MagCard / TTL asynchron
Frequency: 125 kHz
Read range between
identification medium and
reader
The actual read range performance depends on the range of action
of the antenna embedded in the identification medium. It may range
up to 80 mm (3.15”).
General Data:
- Ambient temperature -20° C to +55° C/ -4° F to 131 ° F
- Protection category IP 66, potted electronics
- EMC FCC-Mark. This device complies with Part 15 of the FCC Rules
CE-Mark. Complies with the R&TTE Directive valid in the EU
countries.
(EN 300 330- SRD and ETS 300 683)
- Weight Approx. 180 g
Installation Wall mounting by means of screws
Housing:
- Material Polycarbonate
. Color Light gray
- Dimensions
(LxWxD in mm/ inch)
118 x 77 x 23/ 4.65x 3.4x 0.91
Connecting cable: 8-wire cable
Display: LEDs, green/ red and blue, beeper alarm
Interflex Datensysteme GmbH & Co. KG
Großwiesenstrasse 24
D-78591 Durchhausen
Tel. ++49-7464/ 382-0
E-Mail: [e-mail]