User Manual

Technical Manual for Master Terminals of the Series IF 152x
Page 16
Open/ Close Housing
The housing consists of two parts:
• Front part
• Wall part
Both parts are connected via guiding mechanism and secured by a mortise lock.
# Caution: Switch off the voltage supply before opening the housing !
Open housing:
# Open the mortise lock with the key and pull it out.
# Push the front part of the housing as far upwards as possible and remove it by pulling it to the front.
# Remove the connecting cables from the boards in the wall part of the housing and take off the front
part of the housing.
Close housing:
# Reconnect all of the connecting cables.
# Hook the front part of the housing to the guiding mechanism of the wall part.
# Push the front part down.
# Insert the mortise lock and lock it with the key.
1
3
2
1 Front part 3 Mortise lock
2 Wall part