User Manual

Accessorizing the Intert S1

Protective Cap

Every S1 ash head includes a protective end cap. The end cap offers protection to the glass dome, ash

tube, and LED modeling lamp during transportation and storage.

To remove the protective cap, pull back on the modier quick-release on the top of the ash unit to release

the mount lock. While holding back the release button, twist the cap counter-clockwise.

To place the protective cap back on the ash unit, insert the three prongs of the end cap into the mount and

rotate clockwise until you hear a click.

Bowens® Mount Modiers

Modifying the light from your S1 is key to creating dynamic images. The S1 can be used with any light

modier with a Bowens® S-Type mount.

To attach a Bowens® mount modier to the S1, simply insert the three prongs of the modier ring into the

mount and rotate clockwise until you hear a click. To remove the modier, pull back on the modier quick-

release on the top of the ash unit to release the mount lock and rotate the modier counter-clockwise.

Softboxes

The variety of softbox shapes and sizes allow for endless lighting possibilities. The S1 utilizes an S-Mount

style system that ts softboxes with Bowens® mount speedrings.

To attach a softbox with a Bowens® mount speedring, simply insert the three prongs of the speedring into

the mount and rotate clockwise until you hear a click. To remove the softbox, pull back on the modier

quick-release on the top of the ash unit to release the mount lock and rotate the softbox counter-clockwise.

Intert offers a variety of light modiers as well as various branded speedrings to make your favorite

modiers compatible with our lighting systems.