User Manual

Accessorizing the Badger Unleashed

Protective Cap

Every Badger Unleashed ash head includes a protective end cap. The end cap offers protection to the

glass dome, ash tube, and LED modeling lamp during transportation and storage.

To remove the protective cap, pull back on the modier quick-release on the top of the ash unit to release

the mount lock. While holding back the release button, twist the cap counter-clockwise.

To place the protective cap back on the ash unit, insert the three prongs of the end cap into the mount and

rotate clockwise until you hear a click.

Bowens® Mount Modiers

Modifying the light from your Badger Unleashed is key to creating dynamic images. The Badger Unleashed

can be used with any light modier with a Bowens® S-Type mount.

To attach a Bowens® mount modier to the Badger Unleashed, simply insert the three prongs of the

modier ring into the mount and rotate clockwise until you hear a click. To remove the modier, pull back

on the modier quick-release on the top of the ash unit to release the mount lock and rotate the modier

counter-clockwise.

Pop-Up Mount Softboxes

The Badger Unleashed utilizes Intert’s proprietary Badger-Series hybrid mounting system that ts both

softboxes with Bowens® S-Mount speedrings, as well as speedlight-style pop-up softboxes.

To attach a pop-up style softbox to the light, simply insert the glass dome of the ash into the hole at the

back of the softbox and place one of the four panel corners at the rear of the softbox onto the black lip of

the light’s mounting ring. Then, work your way around, stretching the next panel over the lip, and then the

next until all four corners are seated on the black lip and the glass dome is fully inserted into the box.

Intert offers a variety of light modiers as well as various branded speedrings to make your favorite

modiers compatible with our lighting systems. Visit our website below for more information!