User's Manual

2. First-Time Installation and Configuration

2.1. Selecting a Power Supply Method

The IWE3200 can be powered by either the supplied AC power adapter or the optional IWE500-INJ

POE Power Injector. The IWE3200 automatically selects the suitable power depending on your deci-

sion.

To power the IWE3200 by the supplied power adapter:

1. Plug the power adapter to an AC socket.

2. Plug the connector of the power adapter to the power jack of the IWE3200.

NOTE:

This product is intended to be power-supplied by a Listed Power Unit, marked “Class 2”

or “LPS” and output rated “12V DC, 1.25 A minimum” or equivalent statement.

To power the IWE3200 by IWE500-INJ Power Injector:

1. Connect the power cord cable from power outlet to the IWE500-INJ power connector.

To Power Outlet

Fig. 2. Connecting the power cord cable to IWE500-INJ.

2. Check the “POWER” LED: if system is normal, the LED will be on (Green light); otherwise, the

“POWER” LED will be off.

3. Connect the Ethernet cable (RJ-45 Category 5) from Ethernet Hub/Switch to the “DATA IN”

port of IWE500-INJ Power Injector.

4. Connect another Ethernet cable (RJ-45 Category 5) from “POWER & DATA OUT” port of the

IWE500-INJ Power Injector to the IWE3200. Please note the indication on the panel of

POE-enabled RJ45 port of IWE3200 (LAN interface #4).

Fig. 3. POE enabled LAN Port Position.