User's Manual

Appendix A: Default Settings
TIP: Press the SF-Reset switch on the housing of a powered-on DRBAP to reset the configuration
settings to factory-default values.
Setting Name Default Value
Global
User Name root
Password root
Operational Mode AP Repeater
IEEE 802.11g
Regulatory Domain FCC (U.S.)
Channel Number for WLAN 1 11
Channel Number for WLAN 2 6
SSID for WLAN 1 wireless1
SSID for WLAN 2 wireless2
Transmission Rate for WLAN 1 Auto
Transmission Rate for WLAN 2 11Mbps
MAC Address of WLAN 1 and of
WLAN 2
See the label on the housing of the
DRBAP.
WDS Links None
Security Mode Open System
Selected WEP Key Key #1
WEP Key #1 00-00-00-00-00
WEP Key #2 00-00-00-00-00
WEP Key #3 00-00-00-00-00
WEP Key #4 00-00-00-00-00
LAN Interface
Method of obtaining an IP Address Set manually
IP Address 192.168.0.1
Subnet Mask 255.255.255.0
Default Gateway 0.0.0.0
Management
UPnP Enabled
System Log Local Log
SNMP Enabled
SNMP read community public
SNMP write community private
41