User's Manual
Manuals
Brands
Interepoch Technology Manuals
Electronics
Wireless Internet Access Server Appliance
40
41
42
43
44
45
46
47
48
49
Table Of Contents
Introduction
Overview
Features
LED Definitions
First-Time Installation and Configuration
Selecting a Power Supply Method
Mounting the DRBAP on a Wall
Preparing for Configuration
Connecting the Managing Computer and the DRBAP
Changing the TCP/IP Settings of the Managing Computer
Configuring the DRBAP
Entering the User Name and Password
Step 1: Selecting an Operational Mode
Step 2: Configuring TCP/IP Settings
Step 3: Configuring IEEE 802.11 Settings
Step 4: Reviewing and Applying Settings
Deploying the DRBAP
Using Web-Based Network Manager
Overview
Menu Structure
Save, Save & Restart, and Cancel Commands
Home and Refresh Commands
Viewing Status
Associated Wireless Clients
Current DHCP Mappings
System Log
General Operations
Specifying Operational Mode
Changing Password
Managing Firmware
Upgrading Firmware by HTTP
Backing up and Restoring Configuration Settings by HTTP
Upgrading Firmware by TFTP
Backing up and Restoring Configuration Settings by TFTP
Resetting Configuration to Factory Defaults
Configuring TCP/IP Related Settings
Addressing
DHCP Server
Basic
Static DHCP Mappings
Configuring IEEE 802.11g-Related Settings
Communication
Basic
Bridge Links
Link Integrity
Association Control
AP Load Balancing
Security
AP Interface
LAN-to-LAN Bridge Interface
IEEE 802.1x/RADIUS
Configuring Advanced Settings
Packet Filters
Ethernet Type Filters
IP Protocol Filters
TCP/UDP Port Filters
Management
UPnP
System Log
SNMP
Appendix A: Default Settings
Appendix B: Troubleshooting
Appendix C: Additional Information
C-1: Firmware Upgrade Using Xmodem Upgrade
1.
Type the IP address of the target host.
2. Type
the
Community
for the host.
3.
Select the corresponding check box next to the IP address text box.
40
1
...
...
43
44
45
46
47
48
...
49
