User's Manual
Table Of Contents
- Introduction
- First-Time Installation and Configuration
- Using Web-Based Network Manager
- Appendix A: Default Settings
- Appendix B: Troubleshooting
- Appendix C: Additional Information
Fig. 14. Link health monitoring.
Run Wireless Network Manager on a computer and locate the DRBAP you want to manage. Go to the
WDS tab, and then click Test. The test results (OK or Broken) will be shown in the Link Status col-
umn of the WDS links table.
2.4.5. Step 4: Reviewing and Applying Settings
Fig. 15. Settings changes are highlighted in red.
On the start page, you can review all the settings you have made. Changes are highlighted in red. If
they are OK, click Restart to restart the DRBAP for the new settings to take effect.
NOTE: About 7 seconds are needed for the DRBAP to complete its restart process.
13