User's Manual
Manuals
Brands
Interepoch Technology Manuals
Electronics
11Mbps Internet Access Server Appliance
1
2
3
4
5
6
7
8
9
10
Table Of Contents
Introduction
Overview
Features
Feature Comparison
LED Definitions
First-Time Installation and Configuration
Selecting a Power Supply Method
Mounting the AP on a Wall
Preparing for Configuration
Connecting the Managing Computer and the AP
Changing the TCP/IP Settings of the Managing Computer
Configuring the AP
Entering the User Name and Password
Step 1: Selecting an Operational Mode
Step 2: Configuring TCP/IP Settings
Step 3: Configuring IEEE 802.11 Settings
Step 4: Reviewing and Applying Settings
Deploying the AP
Setting up Client Computers
Configuring IEEE 802.11b-Related Settings
Configuring TCP/IP-Related Settings
Confirming the Settings of the AP and Client Computers
Checking if the IEEE 802.11b-Related Settings Work
Checking if the TCP/IP-Related Settings Work
Using Web-Based Network Manager
Overview
Menu Structure
Save, Save & Restart, and Cancel Commands
Home and Refresh Commands
Viewing Status
Associated Wireless Clients
Current DHCP Mappings
System Log
Link Monitor
General Operations
Specifying Operational Mode
Changing Password
Managing Firmware
Upgrading Firmware by HTTP
Backing up and Restoring Configuration Settings by HTTP
Upgrading Firmware by TFTP
Backing up and Restoring Configuration Settings by TFTP
Resetting Configuration to Factory Defaults
Configuring TCP/IP Related Settings
Addressing
DHCP Server
Basic
Static DHCP Mappings
Configuring IEEE 802.11b-Related Settings
Communication
Basic
Link Integrity
Association Control
AP Load Balancing
Wireless Distribution System
Security
Basic
MAC-Address-Based Access Control
IEEE 802.1x/RADIUS
Configuring Advanced Settings
Packet Filters
Ethernet Type Filters
IP Protocol Filters
TCP/UDP Port Filters
Management
UPnP
System Log
SNMP
Appendix A: Default Settings
Appendix B: Troubleshooting
B-1: Wireless Settings Problems
B-2: TCP/IP Settings Problems
B-3: Unknown Problems
Appendix C: Additional Information
C-1: Firmware Upgrade Using Xmodem Upgrade
C-2: Distances and Data Rates
1.4. LED Definitions
There are several LED indicators on the housing of the AP. They are defined as follows:
ALV
:
Alive
. Blinks when the AP is working normally.
RF
:
IEEE 802.11b interfaces activity
LAN
:
Ethernet LAN interface activity
PWR
:
Power
4
1
...
...
7
8
9
10
11
...
...
54
