User Manual

5.2 Microsoft Networking Checklist
In order to the InterEpoch 802.11b USB WLAN can run properly, some network items must be presented
in the Microsoft “ Network Neighborhood “ setup. To check and activate the network setup,
right-click the “Network Neighborhood“ and select “Properties”. The following items should be
presented in the network setup:
1. InterEpoch USB FastVNET (A) Adapter
2. IPX / SPX-compatible Protocol -> InterEpoch USB FastVNET (A) Adapter
3. NetBEUI -> InterEpoch USB FastVNET (A) Adapter
4. TCP / IP -> InterEpoch USB FastVNET (A) Adapter
5. File and printer sharing for Microsoft Networks.
6. Client for Microsoft Networks
If any of these items are missing, please follow the instructions below to install them properly:
Set up the Network Protocol
s:
Click “ Add “ and select “ Protocol “ on Network “ Configuration “.