User Manual

June 10, 2021 Ecoh 915 Manual 1.0.3 Pag. 24 of 25
When a connection is established the home page it will be shown.
In the home page are present:
• The mac address alias (eg. PS-17397)
• Sensor id number (eg. 65432)
• The status (free or occupied)
• And if it’s active or Not Active (the big dot, green or white)
and 6 buttons for:
• Change the sensor
• Force a Keep Alive message from sensor
• Calibrate the sensor
• Open the Configuration Menu to see the actual config and to
change parameters
• Switch sensor from LoRa WAN to LoRa Pro (not enabled for
US/Canada)
• Update the sensor’s firmware via BLE
!!! IMPORTANT !!!
When Parking Sensors App is connected to a sensor, sensor can’t communicate in LoRa Wan, because it’s
possible to use one connection per time only.