User Manual

June 10, 2021 Ecoh 915 Manual 1.0.3 Pag. 23 of 25
6. PARKING SENSOR APP
Parking Sensor App is the Android based app for the on-site management of sensor. It can be used
to sends commands to sensors directly on the field, for example to calibrate them and to modify
parameters.
Parking Sensors App uses a BLE connection protected to communicate with Ecoh Sensor.
Parking Sensor App is distributed by Intercomp directly to its distributor or customer and it’s not
published on Android Store.
The installation of Parking Sensor in an Android device does not require
particular permissions or authorization. It only uses the BLE radio to
weak-up sensors and to send to them commands or to retrieve the
actual configuration.
When it starts it shows the sensor’s id received. Clicking on one id a
connection will be established with that sensor.
If the selected sensor is present in the sensor’s configuration file of the
customer, that contains all the permission keys of the sensors, the
home page of the configuration will be opened.
If the sensor is not present in the sensor’s configuration file, app will
ask to insert the PIN code for association, and the Login Key of the
sensor.