User Manual

June 10, 2021 Ecoh 915 Manual 1.0.3 Pag. 20 of 25
5.2. Upgrading the Configuration Manager App
Occasionally, some improvements and new services will be released. In this case, the new version
of Configuration Manager App will be published in the download page. Please check on it for the
new versions.
5.3. Sensor Configuration App sections
Sensor Configuration is developed for ECOH Sensor series only.
The main sections are:
• Information, to see all the parameters configured in the sensor;
• General Settings, to modify the general functionality of sensor;
• Network Settings, to set all the parameters of the network available;
5.4. How to plug the Smart Parking Sensor
Before using the Sensor Configuration App, you must connect sensor to USB cable, and power on
the sensor.
The Ecoh USB cable has 2 connectors on the sensor side, one for Power and one for TX-RX. After
the connection of the power wait 10 seconds for sensor startup, and then push the switch to enable
the connection with Sensor Configurator App.
Before to press the Connect button select the correct COMx port number to use.
The Ecoh USB cable includes in the USB connector a FTDI USB – RS232 converter. If you don’t find
any COMx port, please check on Windows Device Manager if the USB driver is correctly installed.