User Manual

June 10, 2021 Ecoh 915 Manual 1.0.3 Pag. 11 of 25
When connection will be executed, the SensorConfigurator App will read and show all the
parameters set in the sensor.
The available commands for sensors are shown in the follow table
Calibration
To set Sensor at its magnetic zero.
Sampling time
Vehicle detection frequency
Keep Alive Time
Keep Alive message frequency
LoRa Wan Parameters
All the LoRa WAN keys and configurations
Slot Number
The parking bay number to assign to sensor
Magnetic Thresholds
The intervention thresholds, to determinate the free or busy
status
Day/Night mode
Start – end hourly for night mode (Low Consumption)
Set Date Time
To set the actual date time
LoRa Wan Use
Cases
To set the common used LoRa WAN Use Cases (in ABP
and OTAA).
FW Upgrade
To upgrade the sensor’s firmware
To configure other parameters please contact Intercomp team.