Installation Guide
2. Power Connection Instruction
The mirror comes with a 5 ft power cable that can be directly plugged into the switch for
convenient use. It can also be hardwired by cutting off the plug and control the ON/OFF
of power via the wall switch.
Warning:
Removing the plug connector will invalidate your
product warranty.
If you would like to test the product function prior
to installation, please test the product in any
standard plug socket.
(1) You would see there three wires with three colors--white,green and black.
(2)Safely connect these three wires one by one to the wires of the wall switch in
your home.
Before you start the installation, please ensure that:
-the wall where the product is being installed is able to support the weight of the product
-the main electrical supply has been powered off to complete installation
Green=GROUND wire connect to the ground wire in your box,or to the box as a ground.
White=Neutral wire connect to the White Neutral wire in your box.
Black=LIVE wire connect to the Black LIVE wire in your box.
Live wire (Black wire)
Neutral wire (White wire)
Ground wire (Green wire)