Instructions / Assembly

Pre-burying
power line
live wire
Naught wire
Earth Wire
/yellow
Pre-burying power line make sure the
hole 's diametre is enough to connect
the line.
Pre-burying power line make sure the
hole 's diametre is enough to connect
the line.
1.Choose one sutiable place mark
then drill the hole.
2.Install the fix board. 2.Install the fix board.
1.Choose one sutiable place mark
then drill the hole.
3.Install the beauty mirror.Put
the screw inside the bottom. Lock
the screw cap.
4.Install the beauty mirror.Put
the screw inside the bottom. Lock
the screw cap.
Product made of excellent technology ,
make sure product quality strong and
durable.
When clean product must be careful.Avoid
the product surface be damaged.Please use
clean water or netural wash detergent to
clean the surface.Then use the soft towel clean the surface.Then use the soft towel
to dry.
Do not use chemical composition or
corrosiveness wash detergent .rough towel
to clean.
Suggest to clean the product at certain
time.Make sure the surface is smooth and
clean.If use acerbic wash detergent to clean.If use acerbic wash detergent to
clean the product.It maybe damage the
product's surface.
Please careful.
1.Suggest experience and qualification
professional people install.Be avoid the
losing for the install 's quality.
2.Please make sure before drill in the
wall do not have wire or water line.
3.The company keep the right to amend and
improve the product.It will not notify if improve the product.It will not notify if
change the specificaion fields.
Inspector:
Date:
3.Connect power line.