Ceramic farmhouse kitchen sink INSTALLATION INSTRUCTIONS Due to the manufacturing process, each sink will vary slightly dimension ally. Farmhouse sinks may require custom cabinetry. We recommend consulting an experienced cabinet maker for assistance. Providing the cabinet maker with the actual sink to be installed will ensure a custom fit. Please use assistance when lifting the sink in order to avoid personal injury.
1. Measure & Assemble Supports 2. Cut Front of Cabinet Measure actual height of the apron. + Measure the height of the front apron and add 1/16” to the dimensions when + Build support frames on the inside of cabinet marking the cabinet front cutting location. based on sink measurements. + Use saw to cut the cabinet. NOTE: Always wear protective gear when using dangerous materials.
. Install Sink 4. Install Counter top & Plumbing Carefully place sink into the opening. The weight of sink should be sustained by Use a bead of silicone or preferred adhesive around the rim of the sink. the per-built support frames. Verify the alignment of the sink to the cutout counter top. Align cut counter top Verify sink is leveled from side to side and front to back using a level. Use shims, hole over the sink and press firmly. if needed, to level sink.
