User Guide

Important Assembly Instructions and Operation
Pull the head pillow over the foam insert.
8
Attach it to the headrest using the hook
and loop strip.
Plug the chair into a grounded power
source and turn master switch to ON.
Note the location of the Child Safety Lock.
While sitting in the chair, Raise or Lower
the Backrest to suit your comfort by
pulling the Backrest lever and leaning
back or forward.
2
Place the head pillow foam insert
against the pillow zipper.
1
3
For a more intense massage, if desired,
unzip the outer panel on the backrest
and REMOVE the massage softening pad.
Close the zipper on the backrest.
4
6
Place the lumbar pillow at the base of
the backrest as shown.
5
7
To begin the massage, remove the controller
from the dock located in the left hand arm
rest (See page 10 for details).
To move the iJoy, place your fingers in
the recessed handles at the top of the
backrest. Tip the chair back and move
it with the built-in wheels on the back
of the chair.
8
9