User guide

2
R
EDIALING A NUMBER
From the endpoint interface, do one of the following:
• Tap , and then tap
REDIAL.
• Tap .
PLACING A CALL ON HOLD
While on the call, do one of the following:
• From the endpoint interface, tap .
• From the Active Calls view, tap .
To return to the call, tap , , or the flashing
button.
TRANSFERRING A CALL
To transfer a call from the Active Calls view:
1. Select the call, tap , and then type the extension or outside num-
ber in the Call Transfer dialog box.
2. Tap
OK to transfer the call and disconnect your endpoint.
To transfer a call from the endpoint interface:
1. Tap
XFR, and then do one of the following:
• If you are transferring the call to a subscriber, dial the extension num-
ber.
• If you are transferring the call to an outside number, tap
OUTGOING or
the Outgoing Call access code ( ), and then dial the number.
2. Wait for an answer, announce the call (if desired), and then hang up.
If the extension transferred to is unavailable, tap the flashing button to
return to the caller.
USING REACH ME
To use Reach Me from the Routing view:
1. Tap , and then tap
Change.
2. Select a Reach Me option from the drop-down list (if applicable, enter a
forwarding number, and then tap
Ok.
To use Reach Me from the endpoint interface:
1. Tap
REACH ME or .
2. Tap
BROWSE, and then tap NEXT/PREVIOUS to scroll through the
options.
3. Tap
ACCEPT or to accept the Reach Me setting.
If you selected
SEND CALLS TO, enter the extension or outside number,
and then tap
ACCEPT or .
0
0
9
5 6 0
#
#